In this article, I will help you to provide Samsung J2 Prime Charging solution for free. Let’s learn.
If there is a track missing, then connect by the jumper wire as shown in the picture below.
Steps for J2 Prime Charging Solution:
- Insert Charger in Charging connector of Main Board
- Check voltage at Battery Connector. It should be more than 3.6 V
- Check components as shown in the above pictures by cold testing.
- Check continuity of tracing lines as shown in the above picture. If there is no continuity shown, connect with the jumper wire.
- Check voltage at Charging Connector while plugging Charger. It should be 5V.
- Replace the Charging Connector.
If there is any queries, I will love to answer you.
Also read this article: Mobilephones Sleep Mode Solution
